PT124 Series melt pressure sensor / pressure transducer (Straight / hose type) melt pressure sensor, imperial 1/2 "-20UNF international standard mounting thread, used in high-temperature melt under normal conditions, the fluid pressure measurement and control field gas is widely used in petrochemical, chemical fiber textile, non-woven, non-woven cloth, plastic, rubber, extrusion equipment and other industries. has high accuracy, good stability, the output signal is large, dynamic resistance, versatility advantages. PT124 Series melt pressure sensor / pressure transmitter with high accuracy, good stability, the output signal is large, dynamic resistance, versatility and other advantages. PT124 Series Melt pressure sensor / pressure transmitter parameters pressure range of small and medium-scale projects: within 0 ~ 0.5MPa / 1MPa / 2.5MPa / 5MPa / 10MPa of optional; conventional range: 0 ~ 15MPa / 20MPa / 25MPa / 30MPa / 35MPa / 40MPa / 50MPa within optional; large range: within 0 ~ 60MPa / 70MPa / 80MPa / 100MPa / 150MPa of optional; Accuracy: ± 0.25% FS, ± 0.5% FS (default); output signals: 2mV / V, 3mV / V , 3.3mV / V; supply voltage: 10 (6 ~ 12) VDC signal leads PT124 series melt pressure sensor / pressure transmitters six core gold-plated connectors imports; five-pin connector calibration mode 80% FS; temperature probe stress corrosion resistant coating applied to the high concentration of coarse media; 400 ℃; temperature drift ≤ 0.3 MPa / 100 ℃; five core sensors for electrical connection connector (SX12); mechanical connection defaults Inch 1/2 "-20UNF thread measurements can improve the life of 3 to 5 times (optional); Temperature configure this model without temperature configurations. For one, please refer to the PT131 temperature and pressure measuring series.